ENA-120C
Multi-function Dry and Safety
  • Clearly identified LED control panel provides setting of 15 drying strikes, allowing for accurate management of drying operation.
  • With using advanced technology heater and unique designed blower, this machine has high efficient drying capability.
  • The inverter controls blower's start and speed and automatic-checking intelligent blower rotation control system, when air exhausting has backpressure in checking, the rotation speed of blower would be automatic revised, won’t be controlled by air exhausting backpressure to influence the drying.
  • Easily clean side cotton screen, big door diameter,clean easily.(can be drawn out from the rear side for clean)
  • 12.7mm square holes, the opening percentage of the internal barrel reaches 64%, increasing ventilation efficiency, higher drying speed.
  • Advection hot air design, let more hot air blow the linen, do not waste the hot air, effecting the drying time shortest.
  • 6 agitating rods have a good agitating result, reduce bed sheet tangling or the rubs between bed sheet and internal barrel that lower the cotton wool and extend the linen lives.
  • 1672mm large internal barrel permits linen fully unfolding for drying, with using rotation control of drum, preventing linen from unevenly drying or tangling.
  • Unique drum operation control, preventing linen from crushing or tangling. If the bath towel has much water, the rotating speed will be low; if there is little water, the rotating speed will be fast. Half-drying bed sheet, quilt cover etc., the clockwise rotation is slow,counterclockwise rotation is fast.
  • Can with output convey belt, save carrying time, improve working efficiency.

 Utility model patent:ZL201130329757.2

    Mode                   ENA-120C
Loading(kg) 120kg Total capacity 9.7kw
Distill speed 256kg/hr Pipe Steam 2〞
Steam consumption 528kg/hr Cooling water 1 1/2〞
Drum Diameter(mm) 1,672mm Air 3/8〞
Depth(mm) 1,445mm Required steam pressure 7.0 kg/cm2
Capacity(Liter) 3,171L Air consumption 35NL /Time
R.P.M clockwise 25rpm
counterclockwise 30rpm
Duct pipe ø600mm or 3,000cm2
Punch hole 12.7mm square Power supply 3ph 220V/380V 50/60Hz
Air flow 200m3/min Distributed electricity 14mm2/8mm2
Door dimension Front 1,100x577mm Maximum current 36A/22A
Rear ø1,584mm Breaker 75A/50A
Controlled by Touch Panel Dimension
(Height size including 350mm shelves height)
2355Wx2725Dx3040H
Motors Drum motor 2.2kw x 4P Net weight 2,200kg
Blower 7.5kw x 4P The material inner container Baked paint